AlumNUS

An Artist in Five Objects

Inside the woodworking studio of Mokko Wood founder Mr Alvan Koh (Arts & Social Sciences ’05), five objects reveal how an NUS education, Japanese craft and the philosophy of shokunin have guided his approach to work and life.

Inside Mokko Wood, the woodworking studio of Mr Alvan Koh (Arts & Social Sciences ’05), the digital world falls away. There are no glowing screens or sleek machines. Instead, the studio revolves around a living material — wood. Even when cut, it is constantly evolving, expanding and contracting in response to its environment. As Mr Koh draws a plane across a piece of timber, forearms tensed, visitors are reminded that the work here is elemental: a man, a tool and a piece of wood.

It has been seven years since the NUS political science and economics alumnus returned from woodworking school in Kyoto to set up his independent practice in Singapore, creating furniture and objects using Japanese techniques. Demand for his creations and woodworking courses has grown to the point where he is now able to take a break from commercial commissions to focus on his own projects. His work, though manual, is deeply entwined with his humanities education.

At NUS, he studied political science because he was fascinated by World War II and wanted to understand what drove people to make the decisions they did. More importantly, he remembers the breadth of subjects he took as an arts student, from sociology, psychology and philosophy to computing, business and accountancy. Together, they gave him insights into human behaviour and ultimately fed a broader quest to understand how to live a better life.

He found such a guide in the Japanese concept of shokunin — the artisan’s commitment to serving something greater than oneself, continual learning and humility. “The tenets of shokunin drive a big part of my work,” says Mr Koh. The lessons of that philosophy are embedded in the things around him.

1. The Plane: The tool that taught him how much he didn’t know

Mr Koh’s first Japanese plane, or kanna, is a deceptively humble object. He bought it before he knew how to prepare or use it properly, then watched YouTube tutorials to try to figure it out himself. He failed.

The problem, he eventually discovered, was not simply his technique. The tool he was using to prepare the plane was itself inadequate. When he finally brought the plane to his sensei in Kyoto, the answer was obvious: the tool he had been using was not flat enough.

The experience taught him something that has stayed with him ever since: “You don’t know what you don’t know.”

It was one reason he enrolled in woodworking school. Expecting to learn advanced techniques, he found himself returning instead to the basics. Even drawing a straight line, he discovered, was harder than he had imagined.

The plane became a reminder of the limits of self-teaching — and of the humility required to move beyond them. “Never underestimate how large the universe is,” he says.

2. His Body: The tool he cannot replace

Mr Koh’s favourite woodworking tool is one that few expect him to name: his body.

When he teaches sawing, he tells students not to think of the saw as the tool. The tool is the entire body holding it. The hands, arms and body determine the movement, pressure and precision. Everything else is an accessory.

His own body, however, was something he neglected for years. Only about two years ago did Mr Koh realise that if he wanted to continue woodworking for the long term, he needed to take care of himself. He returned to exercise, started going to the gym regularly and, at 47, is preparing for his first HYROX race. “I think it will lengthen my career,” he says.

There is something quintessentially shokunin about that decision. For Mr Koh, work and life are not separate compartments. The craft is woven into how he lives.

His hands show the physical consequences: a strong grip, nails kept short to facilitate tool sharpening, and the occasional injury. But he sees the body not simply as something that bears the wear of craftsmanship. It is what makes craftsmanship possible.

3. The Fragrance Box: The object that taught him how to see

The most instructive object in the studio is one Mr Koh did not make.

A small Japanese fragrance box caught his eye at a traditional craft shop in Tokyo. Its lid features delicate wooden slats, created by sandblasting away the softer spring and summer growth of a piece of Japanese cedar, leaving the lines of the harder winter growth behind.

What astonished Mr Koh was not merely the technique, but the knowledge embedded in it. He compares it to knowing the alphabet — and then turning it into a song. He can spend hours explaining the properties of timber, but this craftsman has taken that knowledge and translated it into an object that communicates without words.

“That, for me, is next level,” he says.

It is also an expression of the Japanese respect for timber that Mr Koh admires. Japanese craftsmen understand how a tree grew and how its orientation should be preserved when the timber is used. The lesson of the box is simple but profound: mastery is not merely knowing the material. It is learning to see what the material is telling you.

4. The Shaving Box: The commission that cannot be repeated

The shaving box on Mr Koh’s bench began with a straightforward brief: a client wanted a home for his collection of Japanese razors.

Mr Koh chose Siberian pine with dense grain for the small box, paired it with walnut for contrast and left the dovetail joints proud so the craftsmanship could remain visible.

Yet even a familiar object can teach him something new. Every batch of timber behaves differently, Mr Koh says. A tree that grew on a slope has different characteristics from one that grew on flat ground. Once cut, stresses within the timber are released, causing pieces to warp and bow. He must allow the wood to acclimatise, sometimes for months, before working it further.

“The last batch completely makes me unlearn what I learned from the earlier batch,” he says.

That is shokunin in practice: never assuming that because you have done something before, you have finished learning it.

And after years of making his best work for customers, Mr Koh now has the means to turn his attention to his own home. “I’ve never made anything for myself because I’ve never been able to afford my own work,” he laughs. He will be making a dining table, bench, chairs and screens.

His dearest customer, he says, is his family.

5. The Cabinet: A career in summary

In the studio is a cabinet that may eventually tell the story of Mr Koh’s entire career.

The cabinet, which houses his tools, is constructed from offcuts of previous projects: a knife box, a table, another cabinet, even a discarded door. Each fragment carries the memory of something he has made.

The idea came from a fellow carpenter, who told Mr Koh about his grandfather, a coppersmith who worked on a single vessel throughout his career. The story prompted Mr Koh to make something for himself after years of reserving his best work for customers.

It is still unfinished, with more offcuts to be integrated as Mr Koh continues to refine its construction. Perhaps this is fitting. When he looks at the cabinet, he cannot name a favourite project or a defining achievement. He simply sees more work to be done.

For a craftsman guided by the belief that he is never the finished product, there may be no better representation of his career.